Sewage pumps with cutter system - Barracuda GRP56-111

Cast iron submersible pumps with cutter system for pressure sewage systems

50 Hz
60 Hz

Specifications:

Discharge size
DN 50

Max. head
42,0 - 68,0 m

Max. flow
30,7 m³/h

Motor power P1
7,5 - 11,0 kW

Motor power P2
6,4 - 9,5 kW

Characteristics

Sewage pumps with cutter system - Barracuda GRP56-111

Application

The installation of conventional sewer systems in areas of low population like small villages, farms or under difficult topographic conditions is often extremely expensive, mainly because of the high cost for large diameter pipework installation. HOMA provides the perfect, economical alternative with Barracuda grinder pump pressure sewage systems. The Barracuda pumps cut all solids present in the sewage into small particles. This allows the use of pipes from 50 mm diameter, which can be easily laid at low cost with a minimum of construction work.

Installation

Permanent with auto coupling system or with ringbase stand.

Materials

Pump housing, motor housing, impeller (Cast iron EN-GJL-250), Cutter system (Stainless steel 1.4122), Mechanical seals (Silicon-carbide/ Silicon-carbide), Rotor shaft, screws, cooling jacket (U) (Stainless steel), Seal kit (Perbonane).

Pumped liquid

Waste water or sewage containing soft solids. Max. liquid temperature: 40°C, short term up to 60°C.

Motor

Fully submersible, pressuretight electric motor, three phase, oil-filled. Thermal sensors embedded in stator winding. Insulation class H. Degree of motor protection IP 68. Cable connection chamber totally isolated from motor housing.

Features

The range of GRP 56–111 models offer unique hydraulic performance, combined with high efficiency and a supreme quality standard. These pumps are applied wherever extreme high head pumping capability up to 7 bar is required.

The network frequency is 50 Hz in the EU.
In other parts of the world, such as in the North American region, Brazil, Saudi Arabia or South Korea 60 Hz.

HOMA pumps are available for both frequency ranges. A selection of the pumps for the valid frequency range at the installation site must be made accordingly. We are happy to assist you in the selection of the right pumps.


Select 50 Hz

Select 60 Hz

At this point, you exit the HOMA website and are directed to the website offering our pump selection software HOP.Sel.

Frequency

50 Hz