Every construction site places different demands on the dewatering pump, which is why particularly clever solutions are required for difficult pumped media. In order to enable a strong pumping action, especially with muddy and greasy media, the pump in the new Bau-Box R is equipped with a stainless steel agitator head. The rotation of the agitator head results in improved flowability of the pumped medium. Problematic mixtures of dirty water, sand or bentonite are pumped off without any problems due to the turbulence and the special suction behavior of the HBPR construction pump. The compact powerhouse is also technically convincing, as it has all the technical features of the construction box pump.

Stationary or transportable. Design with float circuit as automatic dirty water pump with water level-dependent operating control.

Motor housing: stainless steel | Motor shaft: stainless steel | Screws: stainless steel | Impeller: cast iron GJS | Pump housing: cast iron GG | Outer casing: stainless steel | Shaft seal: shaft seal ring NBR + double-acting mechanical seal, ceramic/carbon/SIC | Elastomers: NBR

Clear or dirty water.

Dirty water with abrasive (e.g. sandy) components.

Pressurized water-tight, medium-flooded motor, insulation class F, protection class IP 68. Cable connection compartment separated from the motor. AC version with thermal sensor for temperature monitoring in the winding. Connection cable: H07RN8-F4G1

Strongly dimensioned chrome steel motor shaft, permanently lubricated roller bearings.

Shaft seal in combination with double-acting mechanical seal in oil bath.