Spherical clearance
80 mm
Discharge size
DN 80 / DN 100
Max. head
6,2 - 38,1 m
Max. flow
25 - 210 m³/h
Motor power P1
1,7 - 13,0 kW
Motor power P2
0,9 - 19,6 kW
HOMA Sanimaster PE, FE, VA compact sewage disposal units are suitable for pumping sewage and waste water from areas below the sewer level (see DIN EN 12056). With their large tank volumes and high performance submersible waste water pumps they are the ideal solution for the disposal from large private, commercial or public buildings, hospitals, schools etc.
Collecting tank (see tank types), Motor housing, pump housing, impeller (Cast iron EN-GJL-250), Rotor shaft, screws (Stainless steel), Seal kit (NBR).
Clear water or drainage water, waste water or sewage containing soft solids. Max. liquid temperature: 35°C, short term up to 60°C.
Fully submersible, pressure tight electric motors 400-415 V / 3 Ph Thermal sensors embedded in the winding. Insulation class H. Degree of protection IP 68. Large diameter stainless steel rotor shaft, pre-lubricated bearings.
Odour and gas tight tank.
The compact design allows a packed installation with minimum space requirement. The horizontal pump position with the straight-thru tank-pump discharge connection avoids unnecessary elbows. With flanged gate valves fitted between the tank and the pumps, the twin pump unit operates even with one pump disassembled for maintanance or repair. The tanks are available in different materials with volumes from 180 up to 1000 litres.
The network frequency is 50 Hz in the EU.
In other parts of the world, such as in the North American region, Brazil, Saudi Arabia or South Korea 60 Hz.
HOMA pumps are available for both frequency ranges. A selection of the pumps for the valid frequency range at the installation site must be made accordingly. We are happy to assist you in the selection of the right pumps.
At this point, you exit the HOMA website and are directed to the website offering our pump selection software HOP.Sel.
Frequency
50 Hz