Stainless steel sewage pumps - CV(X)

Submersible sweage pumps with vortex impeller

50 Hz
60 Hz


Spherical clearance
80 - 100 mm

Discharge size
DN 80 / DN 100 / DN150

Max. head
1,0 - 58,8 m

Max. flow
43,8 - 133,0 m³/h

Motor power P1
1,7 - 28,0 kW

Motor power P2
1,3 - 25,4 kW

2900 / 1450 rpm


Stainless steel sewage pumps - CV(X)


Pumping of domestic, municipal and industrial effluent and waste water, sewage, sludge and liquid chemicals containing a high level of impurities or fibrous matter. Especially for liquids containing gas.


Single-stage submersible pumps in close-coupled design for permanent or transportable usage.


Motor housing (Stainless steel 1.4436) Pump housing (Stainless steel 1.4408Stainless steel 1.4517) Impeller (Stainless steel 1.4408 or Stainless steel 1.4517) Motor shaft (Stainless steel 1.4462) Bolts (Stainless steel) Elastomeres (FPM, Viton) Cable jacket (Polyolefine) Mechanical seal on medium side (SiC / SiC, Viton) Mechanical seal on motor side (SiC / SiC, Viton) Upper Bearing (Deep Groove Ball Bearing) Lower Bearing (Two angular ball bearings)

Pumped liquid

Max. medium temperature: 40 °C, short term up to 60 °C.


Electric motors, with 2-pole motor speed. Insulation class H, degree of protection IP 68.Thermal sensors embedded in the stator winding protect the motor from overheating. PTC sensors on request.


Large diameter stainless steel rotor shaft, pre-lubricated bearings.


Two independently working silicon-carbide mechanical seals in tandem-arrangement. Oil-filled seal chamber with possibility of control by the inspection screw.


Robust pump unit completely made from stainless steel suitable also for corrosive liquids. Construction made from premium components as well as standard equipped with protection devices to guarantee extended life time and high grade of reliability.

The network frequency is 50 Hz in the EU.
In other parts of the world, such as in the North American region, Brazil, Saudi Arabia or South Korea 60 Hz.

HOMA pumps are available for both frequency ranges. A selection of the pumps for the valid frequency range at the installation site must be made accordingly. We are happy to assist you in the selection of the right pumps.

Select 50 Hz

Select 60 Hz

At this point, you exit the HOMA website and are directed to the website offering our pump selection software HOP.Sel.


50 Hz