Spherical clearance
10 mm
Discharge size
G1 1/4
Max. head
8,0 - 11,5 m
Max. flow
12,0 - 16,0 m³/h
Motor power P1
0,55 - 0,90 kW
Motor power P2
0,26 - 0,48 kW
Pump for pumping clean or soiled water. Cellar draining, keeping trenches, shafts and rooms dry. Domestic waste water disposal in cellar rooms (e.g. washbasins, showers, washing machines). Reduction of surface water. Emergency deployment for flooding. Water extraction from watercourses or reservoirs for irrigation.
Stationary or mobile. Version with float switch for use as automatic water level controlled drainage pump.
Motor housing, motor shaft, screws (Stainless steel), Strainer, outer housing, impeller, pressurised lid (Impact-resistant plastic), Elastomers (NBR).
Clean or domestic waste water with solid content up to 10 mm grain size. Max. temperature of conveying medium: 35°C, briefly up to 60°C.
Pressure watertight, medium-immersed motor. Stainless steel motor housing. Insulation class B, protection type IPX8. Thermal sensor for temperature monitoring in the winding.
A cooling jacket with discharge connector at the top ensures sufficient motor cooling even at low water level (sip operation). Automatic ventilation with additional air vent screw. Removable strainer allows extraction of residual water down to 5 mm. Automatic purging device can be implemented.
For optimum adaptation to the pump medium and operating conditions.
For dirty and muddy media with solids.
The network frequency is 50 Hz in the EU.
In other parts of the world, such as in the North American region, Brazil, Saudi Arabia or South Korea 60 Hz.
HOMA pumps are available for both frequency ranges. A selection of the pumps for the valid frequency range at the installation site must be made accordingly. We are happy to assist you in the selection of the right pumps.
At this point, you exit the HOMA website and are directed to the website offering our pump selection software HOP.Sel.
Frequency
50 Hz