Handling of clear water, storm - and waste water:

- Flood control

- Waste water treatmant plant (pre-treated sewage)

- Raw water intake for drinking water treatment plant

- Cooling-water circulation for Industry

- Large-volume irrigation

- Filling / emptying of dry docks

- Fish farming

- high volume circulation for water parks

Single-stage submersible pumps in close-coupled design for permanent usage.

Motor housing (Grey cast iron GG25) Pump housing (EN-GJS-500-7) Propeller blades (Stainless steel 1.4517) Propeller hub (Grey cast iron EN-GJS-400) Motor shaft (Stainless steel 1.4021) Bolts (Stainless steel) Elastomeres (Nitrile Rubber) Mechanical seal on medium side (SiC / SiC) Mechanical seal on motor side (SiC / SiC) Upper Bearing (Deep Groove Ball Bearing) Lower Bearing (Two angular ball bearings)

Max. medium temperature: 40 °C, short term up to 60 °C.

Three-phase electric motors with 4-, 6- or 8-pole winding. Insulation class of winding H (180°C), protection class IP 68. Thermal sensor on all models, embedded in the motor winding. PTC thermistor or PT100 available on request. With seal probe in oil chamber and junction chamber.

Robust, maintenance-free, permanently lubricated roller bearings. Temparature monitoring of the shaft bearings available on request.

Two independently working silicon-carbide mechanical seals in tandem-arrangement. Oil-filled seal chamber with possibility of control by the inspection screw.

Compact unit of motor and hydraulic with axial propeller for Wet-well operation, installation in vertical circular concrete / steel tube. Self-centering and -sealing inside the tube. No additional alignment during assembly. Angle of Propeller blades manually adjustable for exact adaption to duty point. Blade material highly resistant DUPLEX stainless steel. Complete range of monitoring devices ensure fail-safe reliability.