Wastewater pumps - CAM(X)(S)

Stainless steel wastewater pumps

50 Hz
60 Hz


Spherical clearance
80 - 100 mm

Discharge size
3" - 6"""

Max. head
24,0 - 110,7 m

Max. flow
406,3 - 1761,1 l/s

Motor power P1
2,3 - 18,0 kW

Motor power P2
1,6 - 15,3 kW

1160 / 1750 rpm


Wastewater pumps - CAM(X)(S)


Pumping of domestic, municipal and industrial effluent and waste water, sewage, sludge and liquid chemicals. Also suitable for liquids with solid and fiber content.


Transportable or permanent


Motor housing (AISI 316 Stainless Steel) Pump housing (AISI 316 Stainless Steel/Stainless steel AISI 316 Ti) Impeller (AISI 316 Stainless Steel/Stainless steel AISI 316 Ti) Wear ring (Stainless steel) Motor shaft (Stainless steel AISI 318 LN) Bolts (Stainless steel) Elastomeres (FPM, Viton) Cable jacket (Polyolefine) Mechanical seal on medium side (SiC / SiC, Viton) Mechanical seal on motor side 8SiC / SiC, Viton) Upper Bearing (Deep Groove Ball Bearing) Lower Bearing (Double row angular ball bearing)

Pumped liquid

Max. medium temperature: 40 °C (104°F), short term up to 60 °C (140°F).


Electric motors, with 4-, 6-pole motor speed. Insulation class H, degree of protection IP 68.Thermal sensors embedded in the stator winding protect the motor from overheating. PTC sensors on request.


Large diameter stainless steel rotor shaft, pre-lubricated bearings.


Two independently working silicon-carbide mechanical seals in tandem-arrangement. Oil-filled seal chamber with possibility of control by the inspection screw.


Robust pump unit completely made from stainless steel suitable also for corrosive liquids. Construction made from premium components as well as standard equipped with protection devices to guarantee extended life time and high grade of reliability.


Impeller of the CAM(X)(S) series.

For optimum adaptation to the pump medium and operating conditions.

Enclosed single-channel impeller

For dirty and muddy fluids with solid and long-fibre fractions.

The network frequency is 50 Hz in the EU.
In other parts of the world, such as in the North American region, Brazil, Saudi Arabia or South Korea 60 Hz.

HOMA pumps are available for both frequency ranges. A selection of the pumps for the valid frequency range at the installation site must be made accordingly. We are happy to assist you in the selection of the right pumps.

Select 50 Hz

Select 60 Hz

At this point, you exit the HOMA website and are directed to the website offering our pump selection software HOP.Sel.


50 Hz

This website uses cookies

We use cookies and other analytical tools to improve the quality of our website and its content. By clicking on "OK" or remaining on the website, you agree to their use. Further information can be found in our Privacy Policy