HOMA CTP stainless steel submersible drainage pumps are suitable for pumping corrosive, abrasive or chemically aggressive liquids.
Transportable or permanent.
Pump housing, motor housing (Stainless steel 1.4436) Rotor shaft, wear ring mechanical connection parts (Stainless steel 1.4571) O-Ringe (FPM (Viton)) Mechanical seals (SiC / SiC, FPM (Viton)) Cable protective hose (Polyolefin) Impeller CTP 50, CTP 53 (Stainless steel 1.4436) Impeller CTP 70 (Stainless steel 1.4517)
Drainage water or sewage containing soft solids and chemically aggressive liquids. PH-valve 3-14. Max. liquid temperature: 40°C, short term up to 60°C. For limitation to lower temperatures see specific chemical resistance of used materials.
Fully submersible, pressure tight electric motor. Insulation class H. Degree of protection IP 68. Thermal sensor embedded in the winding. Cable: H07 RN-F (Plus) 6G1,5 with cable protective hose and longitudinally tight cable trumpet.
Due to the large free passage of 50 mm they are particularly suitable to pump liquids with coarse solids and fiber fractions, wastewater in the industry as well as liquid chemicals in industrial processes.
For optimum adaptation to the pump medium and operating conditions.
For dirty and muddy fluids with solid and long-fibre fractions.
The network frequency is 50 Hz in the EU.
In other parts of the world, such as in the North American region, Brazil, Saudi Arabia or South Korea 60 Hz.
HOMA pumps are available for both frequency ranges. A selection of the pumps for the valid frequency range at the installation site must be made accordingly. We are happy to assist you in the selection of the right pumps.
At this point, you exit the HOMA website and are directed to the website offering our pump selection software HOP.Sel.