Submersible mixers - CHRS

Stainless steel submersible mixers with direct drive

50 Hz
60 Hz


Motor power P1
1,8 - 3,7 kW

Motor power P2
1,9 - 4,1 kW

1750 / 1160 rpm


Submersible mixers - CHRS


Mixing, Agitating, Dissolving, Sludge homogenisation, Stormwater tanks, Suspension of sediments or swimming covers also in pump pits, Mixing of chemicals and high, viscosity liquids, Fishfarming, Flow generation, Cooling basins


Mounting system with drain device for individual positioning of the unit and adjustable.


Propeller (Stainless steel 1.4436) Motor- /Propellershaft (Stainless steel 1.4462) Motor housing (Stainless steel 1.4436) Motor bearing cover (Stainless steel 1.4436) Bolts (Stainless steel) Elastomeres (Viton) Cable jacket (Polyolefine) Installation system (Stainless steel 1.4571) Mechanical seal on medium side (SiC / SiC) Mechanical seal on motor side (SiC / SiC) Upper Bearing (Deep Groove Ball Bearing) Lower Bearing (Double row angular ball bearing)

Pumped liquid

Max. medium temperature: 40 °C (104°F), short term up to 60 °C (140°F).


Electric motors, with 4-6 pole motor speed. Insulation class H, degree of protection IP 68.Thermal sensors embedded in the stator winding protect the motor from overheating. PTC sensors on request. With seal probe in oil chamber.


Large diameter stainless steel rotor shaft, pre-lubricated bearings.


Propeller shaft sealing by mechanical seal in oil chamber, sealed from motor chamber by mechanical seal.


2-blade propeller, self cleaning design, stainless steel


Robust stainless steel mixer made entirely of stainless steel cast and thus particularly suitable for use in corrosive liquids. Compact design by direct drive for installation in buildings with small space available. Suitable for installation on the basin floor due to small propeller diameters. Further mounting possibilities via system dependent lowering device in pump shafts and at basin walls. The production from high-quality components as well as standard monitoring devices within the stainless steel mixer ensure long service life and a high process reliability.

The network frequency is 50 Hz in the EU.
In other parts of the world, such as in the North American region, Brazil, Saudi Arabia or South Korea 60 Hz.

HOMA pumps are available for both frequency ranges. A selection of the pumps for the valid frequency range at the installation site must be made accordingly. We are happy to assist you in the selection of the right pumps.

Select 50 Hz

Select 60 Hz

At this point, you exit the HOMA website and are directed to the website offering our pump selection software HOP.Sel.


50 Hz

This website uses cookies

We use cookies and other analytical tools to improve the quality of our website and its content. By clicking on "OK" or remaining on the website, you agree to their use. Further information can be found in our Privacy Policy