Spherical clearance
C240 WF: 3 mm / C270 WF: 2 mm mm
Discharge size
G1 1/4
Max. head
8,0 - 10,2 m
Max. flow
9,7 - 10,0 m³/h
Motor power P1
0,50 - 0,70 kW
Motor power P2
0,25 - 0,45 kW
ApplicationPump for pumping clean or lightly soiled water. Automatic extraction from water levels of just 5 mm to prevent severe flooding in rooms without pump sump or floor drain, e.g. through flooding, cloudburst, burst pipes or defective washing machines. Emergency deployment for flooding.
InstallationStationary or mobile.
MaterialsMotor housing, motor shaft, screws (Stainless steel) Strainer, outer housing (C240: impact-resistant plastic / C270: stainless steel) Impeller, pressurised lid (impact-resistant plastic) Elastomers (NBR)
Pumped liquidClean or domestic waste water with solid content up to 3 mm grain size. Max. temperature of conveying medium: 35°C, briefly up to 60°C.
MotorPressure watertight, medium-immersed motor. Stainless steel motor housing. Insulation class B, protection type IPX8. Thermal sensor for temperature monitoring in the winding.
FeaturesA cooling jacket with discharge connector at the top ensures sufficient motor cooling at low water level (sip operation). The sensor switch automatically switches the pump on at a water level of just 5 mm. Residual water is pumped off down to 2 mm.
For optimum adaptation to the pump medium and operating conditions.
For dirty and muddy media with solids.
The network frequency is 50 Hz in the EU.
In other parts of the world, such as in the North American region, Brazil, Saudi Arabia or South Korea 60 Hz.
HOMA pumps are available for both frequency ranges. A selection of the pumps for the valid frequency range at the installation site must be made accordingly. We are happy to assist you in the selection of the right pumps.
At this point, you exit the HOMA website and are directed to the website offering our pump selection software HOP.Sel.
Frequency
50 Hz