Submersible pumps for clear and drainage water - Bully C150 WA

Jacket cooled submersible drainage pumps for clear water and drainage water. Available in Q1/ 2021

50 Hz


Spherical clearance
20 mm

Discharge size
G1 1/4

Max. head
10,5 m

Max. flow
12,5 m³/h

Motor power P1
0,75 kW

Motor power P2
0,38 kW


Instruction Manual



Submersible pumps for clear and drainage water - Bully C150 WA


Irrigation and drainage tasks in clean or polluted water. Cellar drainage, keeping pits, shafts and rooms dry. Waste water disposal in cellar rooms (e.g. washbasins, showers, washing machine). Lowering of surface water. Emergency use in case of flooding. Water withdrawal from watercourses or reservoirs for irrigation.


Stationary or transportable. Design with lever float circuit as automatic drainage pump with water level dependent operation control. Continuous operation by means of float lock possible.


Motor housing, screws (stainless steel), Pump housing, suction strainer (glass fibre reinforced plastic), Impeller (glass fibre reinforced plastic), Elastomers (NBR).

Pumped liquid

Clear water, dirty water and grey water with solids up to 20 mm grain size. Max. Temperature of the pumped medium: 35°C, briefly up to 60°C.


Single phase electric motor. Motor protection through temperature monitoring. Insulation class F. Protection class IP 68. Stainless steel motor shaft with ceramic-coated sealing surface, permanently lubricated roller bearings.


10 m connection cable allows an actual diving depth of 7 m. Partially flooded motor for optimal cooling of the motor even when the motor is submerged. Automatic venting with additional venting screw. Removable suction strainer allows residual water up to 5 mm to be sucked out. Automatic flushing device possible.


Impeller of the Bully C150 WA series.

For optimum adaptation to the pump medium and operating conditions.

Open multi-channel impeller

For dirty and muddy media with solids.

The network frequency is 50 Hz in the EU.
In other parts of the world, such as in the North American region, Brazil, Saudi Arabia or South Korea 60 Hz.

HOMA pumps are available for both frequency ranges. A selection of the pumps for the valid frequency range at the installation site must be made accordingly. We are happy to assist you in the selection of the right pumps.

Select 50 Hz

Select 60 Hz

At this point, you exit the HOMA website and are directed to the website offering our pump selection software HOP.Sel.


50 Hz