Sanitary installations with WC, hand basins, washing machines and showers in basement apartments or cellars which are below sewer backflush level require the installation of a lifting station. The Sanipower is the ideal solution for this problem.

Collecting tank (Composite), Pump & motorhousing, impeller (Cast iron GG 25/EN-GJL-250), Cutting system (Stainless steel 1.4528 (55 HRC)), Rotor shaft, screws (Stainless steel), Seal kit (Perbonane).

Drainage water, waste water or sewage. Max. liquid temperature: 35°C, short term up to 60°C.

Single phase electric motor with thermal sensors embedded in the winding. Insulation class H. Degree of protection IP 68. Large diameter steel rotor shaft, pre-lubricated bearings.

Odour and gastight composite collection tank. Max. utility volume 11 l. WC-inlet: DN 100 horizontal, inlet height 180 mm. Vertical inlet DN 50 on the top of the tank. Air vent DN 25 vertical. Cleaning cover with screw cap.

With the advantage of a ground level direct WC connection, it is possible to place the Sanipower directly on to the back of the toilet. The reliable integrated stainless steel cutter system reduces to small pieces all soft solids from the waste water. The diameter for the discharge pipe should be 1 ¼" minimum which can be easily laid at low cost with a minimum of construction work."