Motor power P1
Motor power P2
Below the backwater level, in which brine is obtained from water softening systems, must be disposed of by means of an automatic brine application. The Solestar lifting system is a ready-to-install pumping system for the pumping of brine, which is generated by the backwashing of water softening systems. This brine is collected in the collection tank and transported into the sewage system depending on the water level.
Collecting tank (Plastic), Pump housing (Plastic), Impeller (Plastic), Motor housing (Aluminium AIMg3), Motor shaft (Stainless steel), Bolts (Stainless steel), Lip seal (FPM, Viton), Upper Bearing (Deep Groove Ball Bearing), Lower Bearing (Deep Groove Ball Bearing),
Brine and cold water, Salt content approx. 27 %. Max. liquid temperature: 40°C.
Motor 230V/1Ph. Insulation class F, Degree of protection IP 55.
Corrosion-resistant plastic container. Volume 13 liters. Two 8 mm / 10mm inlets on top face. Pressure Connection ¾” hose fitting incl. non-return valve. Pumps: Sealless pumps with open impeller (free passage 4mm) . Level control: storage pressure switch with timer.
The network frequency is 50 Hz in the EU.
In other parts of the world, such as in the North American region, Brazil, Saudi Arabia or South Korea 60 Hz.
HOMA pumps are available for both frequency ranges. A selection of the pumps for the valid frequency range at the installation site must be made accordingly. We are happy to assist you in the selection of the right pumps.
At this point, you exit the HOMA website and are directed to the website offering our pump selection software HOP.Sel.